SINGLEstream™ 10/100 Link Aggregation Tap
Model Number: SS-100
The SINGLEstream™ Link Aggregation Tap (SS-100) is a 10/100 passive aggregator tap that faultlessly combines both directions of a full duplex ethernet data stream, allowing any connected 10/100 ethernet monitoring device to receive a full duplex stream of data with one network interface card (NIC).
Filtered SINGLEstream™ Dual-Link Aggregation Tap
Model Number: FSS-2000
The Filtered SINGLEstream™ Dual Link Aggregation Tap gives you the power to apply port level packet filtering to your in-line monitoring solutions to ensure your network and security tools only get the data they need.
SINGLEstream™ 10/100/1000 Link Aggregation Tap
Model Number: SS-1204BT-BT-S
The SINGLEstream™ Gigabit Link Aggregation Tap (SS-1204BT-BT-S) is a 10/100/1000 aggregator tap that faultlessly combines both directions of a full duplex ethernet data stream, while allowing the ability to steer your traffic to specific ports using the new 1200 Series feature set.
SINGLEstream™ Link Aggregation Tap (BT) with 2 SFP Monitor Ports
Model Number: SS-1204BT-SFP-S
The SINGLEstream™ Gigabit Link Aggregation Tap (SS-1204BT-SFP-S) is a 10/100/1000 aggregator tap that faultlessly combines both directions of a full duplex ethernet data stream, while allowing the ability to steer your traffic to specific ports using the new 1200 Series feature set.
SINGLEstream™ Link Aggregation Tap (SX) with 2 - 10/100/1000 Monitor Ports
Model Number: SS-1204SX-BT-S
The SINGLEstream™ Gigabit Link Aggregation Tap (SS-1204SX-BT-S) is a 10/100/1000 aggregator tap that faultlessly combines both directions of a full duplex ethernet data stream, while allowing the ability to steer your traffic to specific ports using the new 1200 Series feature set.
SINGLEstream™ Link Aggregation Tap (LX) with 2 - 10/100/1000 Monitor Ports
Model Number: SS-1204LX-BT-S
The SINGLEstream™ Gigabit Link Aggregation Tap (SS-1204LX-BT) is a 10/100/1000 aggregator tap that faultlessly combines both directions of a full duplex ethernet data stream, while allowing the ability to steer your traffic to specific ports using the new 1200 Series feature set.
SINGLEstream™ Link Aggregation Tap (LX) with 2 SFP Monitor Ports
Model Number: SS-1204LX-SFP-S
The SINGLEstream™ Gigabit Link Aggregation Tap (SS-1204LX-SFP-S) is an LX aggregator tap that combines both directions of a full duplex ethernet data stream and hands them off to monitor tools (SFP Ports) in one single stream of data, while also allowing the ability to steer your traffic to specific ports using the new 1200 Series feature set.
SINGLEstream™ 10 Gigabit Link Aggregation Tap (LR, SR, or ER)
Model Number: SS-1204-10G-F
The SINGLEstream™ 1204-10G can combine full duplex data from one 10 Gigabit network tap into one or more streams of data. Connected 10 Gigabit monitoring devices can receive aggregated data from the tap with just one network interface card (NIC) each. Hardware-filtering can be applied to customize data flow to each tool and eliminate port oversubscription.
SINGLEstream™ 10 Gigabit Link Aggregation Tap with 4 - XFP Monitoring Ports
Model Number: SS-1206-10G-F
The SINGLEstream™ 1206-10G-F can combine full duplex data from one 10 Gigabit network tap into one or more streams of data. Up to four (4) connected 10 Gigabit monitoring devices can receive aggregated data from the tap with just one network interface card (NIC) each. Line-rate hardware filtering can be applied to customize data flow to each tool and eliminate port oversubscription.
SINGLEstream™ 10 Gigabit Network Tap (10 - 10G Taps, 2 - 10G Monitoring Ports)
Model Number: SS-2212-10G
The SINGLEstream™ SS-2212-10G In-Line fiber network tap allows you to direct a copy of traffic from any of the ten tapped network links and send the copy to one or both monitoring tools. Passive and non-intrusive visibility is available for two 10G monitoring tools.
SINGLEstream™ Gigabit to 10 Gigabit Link Aggregation Tap (5-LX or SX Taps)
Model Number: SS-1214-10G-F
The SINGLEstream™ 1214-10G can combine data from up to five fiber Gigabit network segments into one or more streams of data. Connected 10 Gigabit monitoring devices can receive aggregated data from multiple network segments with just one network interface card (NIC) each. Hardware-filtering can be applied to customize data flow to each tool.
SINGLEstream™ 10 Gig Tap 2 Dynamic/10 Dedicated Monitoring Ports
Model Number: SS-2222-10G
The SINGLEstream™ SS-2222-10G In-Line fiber network tap allows you to direct a copy of traffic from any of the ten tapped network links and send the copy traffic from each link directly to a monitoring tool. These dedicated monitoring ports only allow traffic from a single connection to be sent to the tool. Dynamic monitoring ports allow you switch monitoring to any of the links tapped. Passive and non-intrusive visibility is available for two dynamic and 10 dedicated 10G monitoring tools.
SINGLEStream™ 10/100/1000 Dual Link Aggregation Tap
Model Number: SS-2206BT-BT-S
The SINGLEstream™ 2200 Series Dual Gigabit Link Aggregation Tap (SS-2206BT-BT-S) is a 10/100/1000 aggregator tap that faultlessly combines both directions of a full duplex ethernet data stream, while allowing the ability to steer your traffic to specific ports using the new 2200 Series feature set.
SINGLEStream™ Dual Link Aggregation Tap (BT) with 6 Monitor Ports (BT/SFP)
Model Number: SS-2210BT-BT/SFP-S
The SINGLEstream™ 2200 Series Dual Gigabit Link Aggregation Tap (SS-2210BT-BT/SFP-S) is a 10/100/1000 aggregator tap that faultlessly combines both directions of a full duplex ethernet data stream, while allowing the ability to steer your traffic to specific ports using the new 2200 Series feature set.
SINGLEstream™ Quad Link Aggregation Tap (BT) with 2 - SFP Monitoring Ports
Model Number: SS-4210-BT-SFP-S
The SINGLEstream™ Quad Link Aggregation Tap contains four (4) network taps. Each tap combines both directions of a full duplex data stream and allows any connected monitoring device, including those with only one NIC, to receive a copy of all the data collected from all four taps - even in a single trace file.
SINGLEstream™ Dual Link Aggregation Tap (SX) with 2 SFP Monitor Ports
Model Number: SS-2206SX-SFP-S
The SINGLEstream™ Dual Link Aggregation Tap (SS-2206SX-SFP-S) is a configurable SX aggregator tap that will tap two links, combining both directions of the full duplex ethernet data stream from both, handing the data off to up to two (2) monitor tools (SFP Ports) in one single stream of data, while also allowing the ability to steer your traffic to specific ports using the new 2200 Series feature set.